News

Blehm Plastics for over 50 years has been a leader in epoxy chemistries. Known globally for their 5-minute epoxy adhesive and their epoxy 2-part clay, Blehm is continuing their years of success. Blehm became a intregal part of BCC Products in 2007 and is a flagship now among some of the best tooling products in the automotive, foundry, marine and aerospace industries.

BP5601 Epoxy Laminating Paste

BP5601 is an epoxy laminating paste for constructing negative molds from models and masters. Built with infused glass strands, BP5601 is a strong, fiber-constructed, mold material. BP5601 is NOT highly abrasive, yet its strength allows for easy cutting and drilling. With a working time of 1–1.5 hours, BP5601 give you enough time to build large tools.

  • Easy to use
  • Strong mold material
  • Long working time
  • Good for negatives
  • Great for corebox supports
  • Quick application

BP9024 Plaster Sealer

BP9024 plaster sealer/adhesive can be used to seal wet or dry plaster models against moisture-vapor transmission. When mixed, BP9024 resin and hardener will gel in approximately five minutes, unless a solvent is added to either the resin or the hardener. If using a solvent, measure equal parts (by weight or volume) resin and hardener; prior to mixing, add an equal weight/volume of solvent, dividing it to add half to the resin and half to the hardener. Note that when mixing a solvent, the gel-time may be extended to about one hour. The solvent facilitates good penetration of the plaster, as well as ensuring the mixture has adequate usable pot life.

BP8005 Pattern Sealer

BP8005 is a water-based paste-wax compound used for the filling of surface irregularities and the forming of fillet-radii on styrofoam foundry patterns. Containing a green dye for easier visibility, BP8005 has been specially formulated and fully approved for the “Full Mold Foundry Process” of direct metal casting using styrofoam patterns.

BP8004 Pattern Sealer

BP 8004 has a soft paste-like consistency which spreads and fills easily and smoothly. BP8004 dries with very little shrinkage and no surface cracking so that one application is usually sufficient to fill most irregularities and form fillet-radii. After application, a firm skin will form within minutes, and it will be thoroughly dry overnight. The sealer on a completed styrofoam pattern will withstand all normal storage and transportation conditions.

BP6007 Three-part Polysulfide

BP6007 is a fast-setting, three-component, polysulfide that will cure at room temperature into a very flexible rubber mold with excellent dimensional accuracy and stability. When a mold is to be used to cast epoxy, polyester, or to make a negative rubber mold, however, a release film will be required; a diluted PVA solution is recommended.

BP9024 5-minute Epoxy Adhesive

BP 9024 is a fast-set epoxy adhesive specially formulated for the bonding of wood and urethane model board; it can also be used for making quick patches and fast laminates. The resin is color indicated (green) and will turn to a clear amber color as the hardener is mixed into the resin. This indicator system promotes fast and efficient mixing of the resin and hardener, ensuring that they are thoroughly mixed, yet with no time wasted in overmixing.

BP9024, one of the first 5-Minute Epoxy Adhesives, is now available in 50ml dual-chamber cartridge packaging.  Using a standard cartridge gun, the new packaging allows for fast, easy dispensing. BP9024 has been a top-selling epoxy adhesive for over 50 years; it’s used in golf club bonding and general purpose bonding of multiple substrates.

BP9024 has been used by professionals in every industry from automotive and aerospace to foundry and marine, and many more. Now with the new 50ml packaging, you can control dispensing and leave a good bead for bonding. Cases of  45 50ml cartridges are available; call 800-556-0067 for more information.

BP6118 Polysulfide Adhesive

BP6118 is a two-component polysulfide adhesive formulated especially for the bonding of Blehm Cold Setting Rubber (CSR) to plaster casings. It may also be used for the bonding of CSR to other backing materials, such as metal or wood.

BP8003 Styrofoam Pattern Adhesive

BP8003 is a water-based latex-rubber styrofoam pattern adhesive used for the rapid build-up of styrofoam foundry patterns. Made of a natural cream color to blend with the styrofoam, BP8002 has been specially formulated and fully approved for the “Full Mold Foundry Process” of direct metal casting using styrofoam patterns.

BP8002 Styrofoam Pattern Adhesive

BP8002 is a water-based latex-rubber styrofoam pattern adhesive used for the rapid build-up of styrofoam foundry patterns. Containing a green dye for easier visibility, BP8002 has been specially formulated and fully approved for the “Full Mold Foundry Process” of direct metal casting using styrofoam patterns.

BP2019 Clear-Amber Epoxy Laminating/Adhesive Resin

BP2019 is a clear-amber epoxy adhesive formulated especially for the bonding of wood and urethane model board. It may be also used as a laminating resin. The resin is color indicated (green) and will turn to a clear amber color as the hardener is mixed into the resin. This indicator system promotes fast and efficient mixing of the resin and hardener, ensuring that they are thoroughly mixed, yet with no time wasted in overmixing.

BP4124 Slow-set Epoxy Casting Resin

BP 4124 is a slow-set, high-temperature, aluminum-filled epoxy casting resin. It will cure rigid overnight, but it requires a post-cure to achieve optimum properties. The filler in the resin will not settle into a hard-pack even after prolonged standing.  BP4124 is formulated such that neither the resin nor hardener contain any carcinogenic material, and skin irritation potential is minimized.

BP4123 Medium-set Epoxy Casting Resin

BP4123 is a medium-set time, high-temperature, aluminum-filled epoxy casting resin. It will cure rigid overnight, but it requires a post-cure to achieve optimum properties. The filler in the resin will not settle into a hard-pack even after prolonged standing. BP4123 is formulated such that neither the resin nor hardener contain any carcinogenic material, and skin irritation potential is minimized.

BP4122 Fast-set Epoxy Casting Resin

BP4122 is a fast-set, high-temperature, aluminum-filled epoxy casting resin. It will cure rigid overnight, but it requires a post-cure to achieve optimum properties. The filler in the resin will not settle into a hard pack even after prolonged standing. BP4122 is formulated such that neither the resin nor hardener contain any carcinogenic material, and skin irritation potential is minimized.

BP3180 Epoxy Surface Coat

BP3180 is a high-temperature, aluminum-filled, epoxy surface coat which has an excellent spraying consistency. BP3180 is formulated such that neither the resin nor hardener contain any carcinogenic material, and skin irritation potential is minimized.

BP3176 Epoxy Surface Coat

BP3176 is a high-temperature, aluminum-filled, epoxy surface coat. It has a thixotropic consistency that allows you to brush on successive coats to the desired thickness without sagging on vertical surfaces. BP 3176 is formulated such that neither the resin nor hardener contain any carcinogenic material, and skin irritation potential is minimized.

BP3046 White Epoxy Surface Coat

BP3046 is a medium set-time white epoxy surface coat that is made for machine dispensing. It is formulated such that neither the resin nor hardener contain any carcinogenic material, and skin irritation potential is minimized.

BP3042 White Epoxy Surface Coat

BP3042 and BP3044 are white, medium set-time epoxy surface coats. Both products are formulated such that neither the resin nor hardener contain any carcinogenic material, and skin irritation potential is minimized.

BP3042 resin is color indicated (green) and will turn white as the hardener is mixed into the resin. This indicator system promotes fast and efficient mixing of the resin and hardener, ensuring that they are thoroughly mixed, yet with no time wasted in overmixing.

BP3044 does not contain a color indicator system.

BP2191 Epoxy Laminating Resin

BP2191 is a high-temperature, aluminum-filled epoxy laminating resin which provides easy brushing characteristics and quick wet-out of fiberglass cloth,  yet it keeps run-off from vertical surfaces to a minimum. BP2191 is  formulated such that both the resin and hardener have no carcinogenic material, and skin irritation potential is minimized.

BP2186 Epoxy Laminating Resin

BP2186 is a high-temperature, aluminum-filled epoxy laminating resin that provides easy brushing characteristics and quick wet-out of fiberglass cloth, yet it keeps run-off from vertical surfaces to a minimum. BP2186 is formulated such that neither the resin nor hardener contain any carcinogenic material, and skin irritation potential is minimized.

BP2022 White Epoxy Laminating Resin

BP2022 is a white epoxy laminating resin that provides exceptional dimensional stability. The resin is color indicated (green) and will turn white as the hardener is mixed into the resin. This indicator system promotes fast and efficient mixing of the resin and hardener, ensuring that they are thoroughly mixed, yet with no time wasted in overmixing. BP2022 provides quick wet-out of fiberglass cloth with easy brushing characteristics, yet it keeps run-off from vertical surfaces to a minimum.

BP2019 Clear-Amber Epoxy Laminating Resin

BP2019 is a clear-amber epoxy laminating/adhesive resin formulated especially for the bonding of wood and urethane model board. The resin is color indicated (green) and will turn to a clear amber color as the hardener is mixed into the resin. This indicator system promotes fast and efficient mixing of the resin and hardener, ensuring that they are thoroughly mixed, yet with no time wasted in overmixing. BP2019 can also be used as a quick-set laminating resin for quick bonding to existing laminate. The 30-minute pot-life and bond strength of BP2019 provide added repair strength and wetting, allowing for quick marine and automotive applications.

BP2014 Epoxy Laminating Resin

BP2014 is a white epoxy laminating resin that provides quick wet-out of fiberglass cloth with easy brushing characteristics, yet it keeps run-off from vertical surfaces to a minimum. The resin is color-indicated (green) and will turn white as the hardener is mixed into the resin. This indicator system promotes fast and efficient mixing of the resin and hardener, ensuring that they are thoroughly mixed, yet with no time wasted in overmixing. When used for structural parts, the physical properties of fiberglass laminates made with BP2014 are excellent.

BP5750 Epoxy Clay Compound

BP5750 is a SPECIAL ORDER gray two-part epoxy clay compound system; when mixed together, the compounds blend into a soft, dough-like consistency and cure to a hard, tough, solid that provides dimensional stability. The gray resin and a colored hardener provide visual assistance to ensure thorough mixing. The mixed clay compounds cure at room temperature and can easily be machined or carved with wood-working tools.

BP5700 Epoxy Clay Compound

BP5700 is a two-part epoxy clay compound system; when mixed together, the compounds blend into a soft, dough-like consistency and cure to a hard, tough, solid that provides dimensional stability. The gray resin and a colored hardener provide visual assistance to ensure thorough mixing. The mixed clay compounds cure at room temperature and can easily be machined or carved with wood-working tools.

BP5403 Epoxy Clay Compound

BP5403 is a two-part epoxy clay compound system; when mixed together, the compounds blend into a soft, dough-like consistency and cure to a hard, tough, solid that provides dimensional stability. The gray resin and a colored hardener provide visual assistance to ensure thorough mixing. The mixed clay compounds cure at room temperature and can easily be machined or carved with wood-working tools.

BP5401 Epoxy Clay Compound

Two part clay compounds are systems. When mixed together form into a soft, dough-like consistency and cure to a hard solid with excellent toughness and dimensional stability. The gray resin and a colored hardener provide visual assistance to obtain thorough mixing. The mixed clay compounds cure at room temperature and can be carved with wood working tools, or easily machined.

BP5323 Brown Epoxy Clay Compound

BP5323 is a SPECIAL ORDER brown two-part epoxy clay compound system; when mixed together, the compounds blend into a soft, dough-like consistency and cure to a hard, tough, solid that provides dimensional stability. The gray resin and a colored hardener provide visual assistance to ensure thorough mixing. The mixed clay compounds cure at room temperature and can easily be machined or carved with wood-working tools.

BP5003 Epoxy Clay Compound

BP5003 is a two-part epoxy clay compound system; when mixed together, the compounds blend into a soft, dough-like consistency and cure to a hard, tough, solid that provides dimensional stability. The gray resin and a colored hardener provide visual assistance to ensure thorough mixing. The mixed clay compounds cure at room temperature and can easily be machined or carved with wood-working tools.

BP5002 Epoxy Clay Compound

BP5002 is a two-part epoxy clay compound system; when mixed together, the compounds blend into a soft, dough-like consistency and cure to a hard, tough, solid that provides dimensional stability. The gray resin and a colored hardener provide visual assistance to ensure thorough mixing. The mixed clay compounds cure at room temperature and can easily be machined or carved with wood-working tools.

BP5001 Epoxy Clay Compound

BP5001 is a two-part epoxy clay compound system; when mixed together, the compounds blend into a soft, dough-like consistency and cure to a hard, tough, solid that provides dimensional stability. The gray resin and a colored hardener provide visual assistance to ensure thorough mixing. The mixed clay compounds cure at room temperature and can easily be machined or carved with wood-working tools.

This website and its content are copyright of Blehm Plastics  | © Blehm Plastics 2017. All rights reserved.

Site design by Sleeping Giant Creative